Introducing the Slide Stop—the first easily movable stop for fenceless miter saw stations THAT DOES NOT DEFLECT. Seriously, this thing is solid as a rock.
Designed by Tamar at 3x3 Custom and Jonathan of KM Tools, the base of the Slide Stop fits into most T-track sizes. Tighten both knobs to lock it into position, and get accurate, repeatable cuts every time.
The real game changer? Keep the base locked in position, but slide the stop out of the way to make longer cuts—without losing your perfect setup. Then slide the stop forward again when you’re ready for more repeatable cuts.
In addition to using the Slide Stop at your miter saw station, it can be added to your router table fence for repeatable stop cuts. To see all the ways you can use the Slide Stop, check out Tamar’s video on building your own miter saw station.
The stop is made of solid aluminum and includes 2 bolts and 2 knobs. Its unique design allows it to fit many different sizes of T-track that have a top opening of 8.3mm or wider. Simply push the squaring ledge against one edge of the T-track, and tighten it down. You’ll have a perfectly square set up every time.
Jonathan’s Hot Take
Tamar has done it again, I’m so happy we get to help her design and produce the Slide Stop. This thing is rock solid, and so convenient. I love how easy it is to slide the stop out of the way when you need to make a different length cut.
Pro tip—grab a couple of these, and they’d be perfect for a project that requires multiple parts in a few different sizes. Just set up multiple stops at specific points, and slide the ones you don’t need out of the way.
This is sure to go fast, so be sure to grab one before we sell out!
This is exactly the same as the Katz-Moses Universal No Deflection Stop Block, but laser etched with the 3x3 Custom logo.
We put these together to celebrate the launch of my 6-in-1 Universal Trim Router Jig — and they turned out so cool!
There are only a limited quantity of these available, so get them while they’re hot!
ZERO DEFLECTION so it won’t budge even if you bang stock up against it (no other stop block on the market can say the same)
Can be 2.25-3.75” tall with positive stops every 1/2”
Has a 1” micro-adjust feature. Don’t worry about having to reset your stop block. Use the micro adjust feature to sneak up on a cut.
Can extend from the fence 1.5 inches or be snug up against it at 1/4” depending on the size of your stock
Can be used in the vertical or horizontal position depending on whether your t-track in on the top or face of your fence
When not in use, it stores out of the way behind your fence. Other stop blocks flip up, which can get in the way or come crashing down and dent your stock.
Version 2.0.1 has a matte anti-slip coating and bigger brass buttons
Want to add greater functionality to your workbench? This Dog Hole Router Template makes it easy.
Dog holes turn a simple workbench into a workholding machine. They let you use bench dogs, hold-downs, holdfasts, planing stops, and a whole lot more — all without clamps.
Simply chuck a 1/4” straight bit and ⅜” diameter bushing in your plunge router, and let the template holes do the rest.
The result is standard size ¾” dog holes spaced 3” apart.
Tamar’s Hot Take:
Why I love it:
Clear acrylic allows you to see through it, ensuring precise hole placement. With lines etched on the underside, you can easily align your jig wherever you need it, making it highly customizable.
No need to remember what size bushing or bit to use because it’s already etched on the jig!
You can drill up to 9 holes at once, which is more than most other jigs on the market, saving you a significant amount of time.
Use your already drilled holes as a reference to align the next series of holes, ensuring a perfect layout.
When you use the included bolts as an edge reference, the holes will be placed 3 inches away from the edge. This distance is ideal for dog holes that are in line with a tail vise, providing enough room to place a hand plane on its edge which turns your workbench into a functional shooting board!
Need some bushings? Check out these Router Bushing Sets we carry, as well as our collection of Router Bits.
WHAT’S INCLUDED:
Dog Hole Router Template
3 x Alignment Bolts
2 x 3/4" Dogs
Want to add greater functionality to your workbench? This Dog Hole Router Template makes it easy.
Dog holes turn a simple workbench into a workholding machine. They let you use bench dogs, hold-downs, holdfasts, planing stops, and a whole lot more — all without clamps.
Simply chuck a 1/4” straight bit and ⅜” diameter bushing in your plunge router, and let the template holes do the rest.
The result is standard size 20mm dog holes spaced 96mm apart.
Tamar’s Hot Take:
Why I love it:
Clear acrylic allows you to see through it, ensuring precise hole placement. With lines etched on the underside, you can easily align your jig wherever you need it, making it highly customizable.
No need to remember what size bushing or bit to use because it’s already etched on the jig!
You can drill up to 9 holes at once, which is more than most other jigs on the market, saving you a significant amount of time.
Use your already drilled holes as a reference to align the next series of holes, ensuring a perfect layout.
When you use the included bolts as an edge reference, the holes will be placed 3 inches away from the edge. This distance is ideal for dog holes that are in line with a tail vise, providing enough room to place a hand plane on its edge which turns your workbench into a functional shooting board!
Need some bushings? Check out these Router Bushing Sets we carry, as well as our collection of Router Bits.
WHAT’S INCLUDED:
Dog Hole Router Template
3 x Alignment Bolts
2 x 20mm Dogs
Looking to improve the accuracy and efficiency of working with a tracksaw? This Tracksaw Rail Hinge is here to help! Designed for seamless adjustments, this durable hinge ensures your tracksaw will always stay aligned for precise cuts every time.
Key Features:
Smooth Operation: Engineered for effortless pivoting, so you can make quick adjustments during your projects.
Simple Installation: The hinge comes fully assembled, simply add the t-bolts and knobs to the side of your bench and you can get back to working on your project.
Increased Accuracy: With the pin on the front rail support, your track will always come back to a square position between cuts. This makes repetitive cuts super efficient!
Compatibility: This version is compatible with Festool, Makita, Milwaukee, Triton, Powertec type rails (rails that have a track on the bottom left side).
Upgrade your workshop with the Tracksaw Rail Hinge, and take your projects to the next level!
See it in action here - PORTABLE MFT WORKBENCH VIDEO
Stop blocks are necessary to make repetitive cuts, but sometimes they get in the way… I designed this stop block to flip up, making it easy to bypass if necessary, then easily flip back down to your required dimension!
Key Features:
Flip-Up Design: Effortlessly lift the stop when not in use to free up your workspace or make longer cuts without losing your set up.
Accuracy: Designed to lock in place when in the down position, it will not move when you bump your workpiece against it.
Easy Installation: The stop comes assembled with all the hardware you need to use it on 2040 aluminum extrusion or standard T-Track (The kit includes nuts for both profiles, you do not need to use both.) It is specifically designed to be used on low profile fences like 2040, but can be used on any fence you need. (It is 33mm or 1-1/2” tall to fit lower profile fences)
Enhance your setup with the Flip Stop to streamline your workflow and improve efficiency on your projects!
Due to popular demand, here is the 3D Print file for my Tracksaw Rail Hinge!
The printer settings I used are displayed in the picture carousel, due to the nature of 3D printing this may be different for you and your machine.
The file includes a “TEST HINGE” so you can test the settings of your own printer before printing the whole thing.
You will need to “break” the hinge loose in order for it to move.
I printed using a 0.4 nozzle, 0.2mm layer, 2 walls, and 25% infill, but feel free to experiment!
The jig requires 2 “Brackets” and 2 “T-Bolt Holders”.
In my experience, the “Brackets” and “Support Pin” printed best standing up (as shown in the picture carousel).
Hardware Required:
Six 1-1/2” T-Bolts
Six Knobs
This version is compatible with Festool, Makita, Milwaukee, Triton, Powertec type rails (rails that have a track on the bottom left side).
Given the nature of 3D printing, some testing and experimentation may be necessary on your part. While I strive to provide helpful information, I may not be able to address all specific questions related to 3D printing. I appreciate your understanding.
These files are intended for personal/non-profit purposes.
If you would like to purchase a completed jig with hardware included check it out here:
3×3 Custom Tracksaw Rail Hinge with Hardware
Reselling these files, even if changed, is strictly prohibited. Please avoid sharing them with individuals who haven’t bought them, even modified versions. I appreciate your understanding and respect for my intellectual property!
NOTE: After purchasing, a link to download the file will appear on the CONFIRMATION PAGE and you will receive a SEPARATE e-mail.
This link will EXPIRE 24 HOURS AFTER PURCHASING, so save the plans as soon as you can!
Expand the capabilities and precision of your router work with this 10-piece brass bushing set.
Bushings turn your router into a precision-cutting machine, whether it’s for duplicating patterns, sign-making, mortises, bowtie keys, inlays, or any project involving template work.
All guides protrude 0.24” and can be used with any template ¼” thick or more.
Includes:
Lock nuts (2x)
8 different outside diameter guide bushings including: 5/16”, ⅜”, 7/16”, ½”, ⅝”, ¾”, 51/64”, 1”
Hard protective case
An MFT Workbench can do it all, but the best part is being able to make square cross cuts on large panels with a tracksaw!
This MFT is small yet robust, and has an extension wing so you can safely make cuts on super long boards!
These plans include measurements in both Metric and Imperial.
1) 20mm Dog Holes spaced 96mm apart with all other dimensions in Metric
2) 20mm Dog Holes spaced 96mm apart with all other dimensions in Imperial
3) 3/4" Dog Holes spaced 3" apart with all other dimensions in Imperial.
So you have lots of options!
Using a Dog Hole Template will help you along the way:
A Rail Hinge will make this MFT even better:
A Stop block for 2040 extrusion is really handy too:
NOTE: After purchasing, a link to download the plans will appear on the CONFIRMATION PAGE and you will receive a SEPARATE e-mail.
This link will EXPIRE 24 HOURS AFTER PURCHASING, so save the plans as soon as you can!
Winter is coming… A few simple steps you take now can prevent a ton of headaches in the future.
This is the ultimate multi-functional jig for your trim router.
Use it for:
Greater control when freehand routing
Flush trimming inlays or exposed joinery on top of your workpiece
Flush trimming edge-banding, dovetails, or box joints
Dados, Grooves, and Mortises (up to 14.5 inches from edge with extension base)
Cutting circles big or small, WITH or WITHOUT drilling a hole in your workpiece (up to 36.5 inches in diameter with extension base)
Includes an extendable base for even more versatility
BONUS FEATURES:
Accepts guide bushings (not included) so you can use it for template and inlay work
Make an on-the-fly router table by securing your trim router upside down with the main base attached
Made from ¼ inch thick acrylic, this jig is durable and transparent — so you can see exactly what you’re doing.
It’ll maximize the precision and uses of your trim router, from detail work to heavier cutting.
Watch this video to see how it’s used.
We’re manufacturing this jig OURSELVES here in the USA so we can give it to you for the best possible price (which is less than it would cost you to buy the materials and build it yourself).
WHAT’S INCLUDED
The 6-in-1 Universal Trim Router Jig comes with all needed components. And with the included instructions, assembly and use are super easy.
Main Base Plate
Triangle Base with threaded hole
2 Extension Feet with Smooth Center Holes
Extension Foot with Threaded Hole
2 Extension Arms
2 Handles
1 Threaded Circle Cutting Pin
6 Knobs
8 T-Bolts
*NOTE: The threaded circle cutting pin is really small. It will be taped to the handle when your jig arrives, so keep an eye out.
COMPATIBLE TRIM ROUTER BASES - INCLUDES CORDED AND CORDLESS MODELS
MAKITA
MAKITA PLUNGE BASE
BOSCH COLT*
BOSCH PLUNGE
DEWALT
DEWALT PLUNGE
MILWAUKEE
RIDGID
RYOBI
* Does not fit the Bosch GKF18V-25N or GLF18V-8, which have a narrow 4 Hole Pattern.