Most circle cutting jigs I have seen involve putting a nail or a screw in the center of a board and then you rotate it around a blade. But sometimes you don't want to mess up your beautiful board! So I came up with an idea to use a hole saw, double sided tape and a router to make a circle cutting jig where you don't need to make a hole in the center of your board. Check out the video below!

TOOLS*** Ridgid Palm Router__ http://amzn.to/2gxCw49 Hole Saw____________ http://amzn.to/2yDjUKp Double Sided Tape___ http://amzn.to/2yMjVLS Router Bit____________ http://amzn.to/2laVbrp I have seen a lot of circle cutting jigs, and all of them require a nail or a screw in the center of your board. But I didn't want to put a hole in the center of my workpiece...

Here are the tools I used: